Salomon Womens Bellevue Splitboardpakke

Womens Bellevue Splitboard + Pomoca Skins

Bellevue-spliboard for kvinner kombinerer allsidighet for freeride med pålitelighet for oppstigning. Med en 100 % resirkulert såle og utstyrt med prima hardware for enkel oppstigning, har Bellevue en Backseat Camber som er kompromissløs nedover i dypt og bratt terreng.

• Best for : Frikjøring, Turer, Avansert, Mellomnivå, Ekspert
  Flex Rating: Stiff : 8/10

FORM
Tapered directional: Hale-bredden er lett redusert (2-20 mm). Dette løsner opp ved innkjøring i svinger og bedrer flyt i dyp snø, uten at det går ut over kanthold på hard snø.

BRETTPROFIL
Rock Out Camber: Flat mellom bindingene for stabilitet, camber nær føttene for respons og rocker i tupp/hale for bedre trøkk.

SIDEKUTT-TYPE
Quadratic: En blanding av elliptiske kurver for enkel svinginnkjøring, problemfrie retningsendinger og flytende overføring fra kant til kant.

BASEMATERIALE
50% recycled sintered base: 50 % resirkulerte sålematerialer! Mindre avfall uten at det går ut over glidegenskapene!

KJERNETYPE
FSC™-sertifisert trekjerne: Den FSC™-sertifiserte trekjernen fremmer miljøansvarlighet, ansvarlig skogbruk, sosiale fordeler og økonomisk bærekraft, samtidig som ytelse og slitestyrke opprettholdes.

Aspen core
Popster: Kjernen er strategisk freset inn i innleggspakkene, noe som gir en mer naturlig fleks under føttene og som overfører energien til nese og hale for ekstra pop.

BASEFINISH
Standard stone finish: Vår basiske stone finish er industriens benchmark for førsteklasses brett. Den eneste forskjellen er at det er vår «basis»-finish.
Natural wax: Parafinfri voks laget av naturlige ingredienser. Et ikke-forurensende komponent som svarer til de høyeste standarder for glidefart.

KANTFINISH
All-Mountain EB: Øyeblikkelig klart for fjellet. Med 1 grad skråkant i tupp og hale, og en 2 grad skråkant mellom føttene for bedre kanthold og null oppheng.

TOURING-SPESIFIKK
Custom POMOCA skins: Spesielt tilkuttede feller - klare for topptur.
Laget med 70 % bærekraftig, grusomhetsfri mohair og 30 % nylon.

PLUM hooks: PLUM krokene er spesiallaget for splitboarding med topp ytelse. Den asymmetriske profilen garanterer en perfekt link mellom alle deler. De er lette og enkle å bruke.

FJÆRING
ABS: Den molekylære strukturen kan beskrives som en betongstang som kombinerer soliditet for energioverføring og dempende egenskaper for støtabsorbering.

FIBER AND RESIN
BIAX HD fiberglass FIBER & HARPIKS 30 % økologisk harpiks: Denne biologiske epoksyharpiks er laget med 30 % av den molekylære strukturen hentet fra planter.

Spark Arc Splitboard Binding

Size:
S  =  39-41
M  =  41-43
L  =  43+

Lightweight and Surfy
The Arc splitboard binding is lightweight for long tours, epic overnighters, trees, and steeps. The baseplate is CNC machined with maximum cutouts to shave weight yet maintain strength and performance while incorporating our industry-leading Tesla T1 binding anatomy. All Arc bindings feature a medium flex version of our Rip ‘N’ Flip highbacks and smaller profile Pillow Line ankle straps with flex windows for a nice surfy ride down. Every piece of this binding is made in-house with the exception of a few screws and the buckles!

Pillow Line Straps
Arc Pillow Line Straps are lightweight - 46% lighter than their fabric strap predecessors. They are ultradurable, comfortable, waterproof, one-piece molded construction, and made 100% in-house. Strap pillows are thin and flexible for a comfortable, conformed fit, while thicker ribs are held off the boot and provide stiffness for a uniquely responsive ride. Arc ankle straps are smaller around the boot than the Surge and feature a flex window for max agility while maintaining support. The toe straps come in one construction for both Arc and Surge models, and are designed to be used as a toe cap but also fit traditionally over the top.

Rip 'N' Flip Highback
The R&D shines with a shape built from 3D scans of popular splitboard boot models, and a list of rad features designed specifically for and fully appreciated by the splitboarder. The Arc highback has a moderate amount of glass fiber fill for medium flex and a surfy feel. The tool free forward lean adjuster (FLAD) offers complete customization from 0° to 22° in ride mode. The Forward Lean Adjuster toggles easily between forward lean position and -13° touring position for easy transitions.

Whammy Bar Climbing Wire
A single fatty climbing wire is built into the baseplate with a side arm lever for easy position changes on the steeps. You can switch easily from stowed, to low (12°), to high (18°) and back again while touring.

Puck Compatibility
Slide them on and snap the ramp down. Snap the ramp up and slide them off. The most functional way to attach your binding to your board in ride mode. Period. Spark R&D bindings are designed to work with all puck compatible splitboard models. When used with Arc bindings conveniently access puck screws with the bindings in place for precise stance adjustment. Available in a flat and a 3° canted model. Note that pucks do not come with the bindings out of the box and must be purchased separately. 

T1 Heel Rest
The T1 Heel Rest catches the climbing wire in the 12° and 18° positions and is specifically designed to hold the T1 Step Locker in place.

Buckles & Plastics
Ladders and adjusters are produced in-house with unique thermoplastics that maintain flex over a wide temperature range, performing well on spring tours as well as sub-zero suffer fests. All straps incorporate Burton's time-tested bomber buckles.

Spark Pucks
Channel-like stance adjustability for splitboards built with inserts. Believe it. This breakthrough in design has riders beyond stoked , and has made Spark Pucks our most popular splitboard accessory.

Slide them on and snap the ramp down. Snap the ramp up and slide them off. The most functional way to attach your binding to your board in ride mode. Period. Spark R&D bindings are designed to work with all puck compatible splitboard models. When used with Arc bindings conveniently access puck screws with the bindings in place for precise stance adjustment.

Weight: 289 g

Aluminum Disks: Oversize aluminum center disk overlaps binding channels for maximum strength and rigidity.

Adjustability:
+/- 6.5mm of toe/heel adjustment, 1.3mm increments.
+/- 30° angle adjustments in 3° increments. 

Stance width adjustments - 4.2mm increments.
Superior Materials: Bindings slide on soft nylon for effor

Custom POMOCA skins
Salomon provides custom skin for ease of mind use on the mountains and touring efficiency. They even provide a specific bag that let you fold the skin back in just couple of seconds so you don’t have to struggle even when conditions are less than perfect.